Okuma Alarm A-1818 – Hand Slide Interlock
Okuma Alarm A-1818 Hand Slide Interlock occurs when the CNC control detects that the loader hand slide mechanism is not in the correct position for the commanded operation.
This alarm occurs when the CNC control detects that the hand slide or loader arms are not in the correct position when a movement command is issued.
On machines equipped with tandem loader systems, the Y-hand and V-hand mechanisms must be in specific angular positions before certain commands (such as the M316 command) can be executed. If the required position conditions are not met, the control system triggers Alarm A-1818 to prevent mechanical collision or unsafe movement.
Possible causes
Several issues may cause this alarm:
-
Y-hand not positioned at the required angular position (Position B)
-
V-hand slide moving while the Y-hand is not correctly positioned
-
M316 command executed while the loader mechanism is in an unsafe state
-
Incorrect synchronization between Y-hand and V-hand mechanisms
-
Mechanical misalignment in the loader system
-
Faulty limit switches or position sensors
-
Incorrect loader parameters or machine configuration
What happens when this alarm appears
When Alarm A-1818 occurs, the CNC control prevents the loader mechanism from operating further.
This safety interlock is designed to avoid collisions between loader arms, slides, or other mechanical components.
Recommended actions
To troubleshoot this alarm, the following steps are recommended:
-
Verify that the Y-hand and V-hand mechanisms are in their correct positions.
-
Check that the loader arms are not mechanically blocked.
-
Inspect position sensors and limit switches related to the loader system.
-
Confirm that the M316 command is issued only when the loader mechanism is in the correct state.
-
Check loader parameters and machine configuration.
Professional diagnostics and repair
If the alarm continues to appear, the issue may be related to faulty sensors, loader control electronics, or mechanical misalignment.
Our technicians specialize in Okuma CNC diagnostics and repair, including control electronics, sensors, and machine automation systems.
